|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
INTEGRATED CIRCUITS 74ABT861 10-bit bus transceiver (3-State) Product specification Supersedes data of 1995 Sep 06 IC23 Data Handbook 1998 Jan 16 Philips Semiconductors Philips Semiconductors Product specification 10-bit bus transceiver (3-State) 74ABT861 FEATURES * Provides high performance bus interface buffering for wide data/address paths or buses carrying parity DESCRIPTION The 74ABT861 bus transceiver provides high performance bus interface buffering for wide data/address paths of buses carrying parity. The 74ABT861 10-bit bus transceiver has NOR-ed transmit and receive output enables for maximum control flexibility. * Buffered control inputs for light loading, or increased fan-in as required with MOS microprocessors * Output capability: +64mA/-32mA * Latch-up protection exceeds 500mA per Jedec Std 17 * ESD protection exceeds 2000 V per MIL STD 883 Method 3015 * Power-up 3-State * Inputs are disabled during 3-State mode QUICK REFERENCE DATA SYMBOL tPLH tPHL CIN CI/O ICCZ PARAMETER Propagation delay An to Bn or Bn to An Input capacitance I/O capacitance Total supply current and 200 V per Machine Model CONDITIONS Tamb = 25C; GND = 0V CL = 50pF; VCC = 5V VI = 0V or VCC Outputs disabled; VO = 0V or VCC Outputs disabled; VCC =5.5V TYPICAL 3.4 4 7 500 UNIT ns pF pF nA ORDERING INFORMATION PACKAGES 24-Pin Plastic DIP 24-Pin plastic SO 24-Pin Plastic SSOP Type II 24-Pin Plastic TSSOP Type I TEMPERATURE RANGE -40C to +85C -40C to +85C -40C to +85C -40C to +85C OUTSIDE NORTH AMERICA 74ABT861 N 74ABT861 D 74ABT861 DB 74ABT861 PW NORTH AMERICA 74ABT861 N 74ABT861 D 74ABT861 DB 74ABT861PW DH DWG NUMBER SOT222-1 SOT137-1 SOT340-1 SOT355-1 PIN CONFIGURATION OEBA A0 A1 A2 A3 A4 A5 A6 A7 1 2 3 4 5 6 7 8 9 TOP VIEW 24 23 22 21 20 19 18 17 16 15 14 13 VCC B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 OEAB PIN DESCRIPTION PIN NUMBER 13 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 1 12 24 SYMBOL OEAB A0-A9 B0-B9 OEBA GND VCC FUNCTION A side to B side output enable input (active-Low) Data inputs/outputs (A side) Data inputs/outputs (B side) B side to A side output enable input (active-Low) Ground (0V) Positive supply voltage A8 10 A9 11 GND 12 SA00278 1998 Jan 16 2 853-1621 18866 Philips Semiconductors Product specification 10-bit bus transceiver (3-State) 74ABT861 LOGIC SYMBOL LOGIC SYMBOL (IEEE/IEC) 1 13 EN1(BA) EN2(AB) 2 3 4 5 6 7 8 9 10 11 2 1 2 3 4 5 6 7 8 22 21 20 19 18 17 16 15 14 23 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 1 13 OEBA OEAB B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 23 22 21 20 19 18 17 16 15 14 9 10 11 SA00279 SA00280 LOGIC DIAGRAM OEAB FUNCTION TABLE INPUTS OEAB L 10 10 Bn OPERATING OEBA H L MODE A data to B bus B data to A bus H H L X Z = = = = An OEBA H H Z High voltage level Low voltage level Don't care High impedance "off" state SA00281 ABSOLUTE MAXIMUM RATINGS1, 2 SYMBOL VCC IIK VI IOK VOUT IOUT Tstg PARAMETER DC supply voltage DC input diode current DC input voltage3 DC output diode current DC output voltage3 DC output current Storage temperature range VO < 0 output in Off or High state output in Low state VI < 0 CONDITIONS RATING -0.5 to +7.0 -18 -1.2 to +7.0 -50 -0.5 to +5.5 128 -65 to 150 UNIT V mA V mA V mA C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 1998 Jan 16 3 Philips Semiconductors Product specification 10-bit bus transceiver (3-State) 74ABT861 RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER Min VCC VI VIH VIL IOH IOL t/v Tamb DC supply voltage Input voltage High-level input voltage Low-level input voltage High-level output current Low-level output current Input transition rise or fall rate Operating free-air temperature range 0 -40 4.5 0 2.0 0.8 -32 64 5 +85 LIMITS Max 5.5 VCC V V V V mA mA ns/V C UNIT DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25C Min VIK Input clamp voltage VCC = 4.5V; IIK = -18mA VCC = 4.5V; IOH = -3mA; VI = VIL or VIH VOH High-level output voltage VCC = 5.0V; IOH = -3mA; VI = VIL or VIH VCC = 4.5V; IOH = -32mA; VI = VIL or VIH VOL II IOFF IPU/PD IIH + IOZH IIL + IOZL ICEX IO ICCH ICCL ICCZ Quiescent supply current Low-level output voltage Input leakage current Control pins Data pins VCC = 4.5V; IOL = 64mA; VI = VIL or VIH VCC = 5.5V; VI = GND or 5.5V VCC = 5.5V; VI = GND or 5.5V VCC = 0.0V; VO or VI 4.5V VCC = 2.1V; VO = 0.5V; VI = GND or VCC; V OE = VCC VCC = 5.5V; VO = 2.7V; VI = VIL or VIH VCC = 5.5V; VO = 0.5V; VI = VIL or VIH VCC = 5.5V; VO = 5.5V; VI = GND or VCC VCC = 5.5V; VO = 2.5V VCC = 5.5V; Outputs High, VI = GND or VCC VCC = 5.5V; Outputs Low, VI = GND or VCC VCC = 5.5V; Outputs 3-State; VI = GND or VCC Outputs enabled, one input at 3.4V, other inputs at VCC or GND; VCC = 5.5V ICC Additional supply current per input pin2 Outputs 3-State, one data input at 3.4V, other inputs at VCC or GND; VCC = 5.5V Outputs 3-State, one enable input at 3.4V, other inputs at VCC or GND; VCC = 5.5V -50 2.5 3.0 2.0 Typ -0.9 3.5 4.0 2.6 0.42 0.01 5.0 5.0 5.0 5.0 -5.0 5.0 -100 0.5 25 0.5 0.5 0.01 0.5 0.55 1.0 100 100 50 50 -50 50 -180 250 38 50 1.5 50 1.5 -50 Max -1.2 2.5 3.0 2.0 0.55 1.0 100 100 50 50 -50 50 -180 250 38 50 1.5 50 1.5 Tamb = -40C to +85C Min Max -1.2 V V V V V A A A A A A A mA A mA A mA A mA UNIT Power-off leakage current Power-up/down 3-State output current3 3-State output High current 3-State output Low current Output high leakage current Output current1 NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. This parameter is valid for any VCC between 0V and 2.1V with a transition time of up to 10msec. For VCC = 2.1V to VCC = 5V " 10%, a transition time of up to 100sec is permitted. 1998 Jan 16 4 Philips Semiconductors Product specification 10-bit bus transceiver (3-State) 74ABT861 AC CHARACTERISTICS GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500 LIMITS SYMBOL PARAMETER WAVEFORM Min tPLH tPHL tPZH tPZL tPHZ tPLZ Propagation delay An to Bn or Bn to An Output enable time to High and Low level Output disable time from High and Low level 1 2 2 1.1 1.0 1.2 2.4 3.1 3.7 Tamb = +25oC VCC = +5.0V Typ 3.4 3.2 3.5 4.6 5.3 5.3 Max 4.9 4.9 5.0 6.0 6.5 6.6 Tamb = -40 to +85oC VCC = +5.0V 0.5V Min 1.1 1.0 1.2 2.4 3.1 3.7 Max 5.2 5.2 5.9 6.9 7.5 7.1 ns ns ns UNIT AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V INPUT VM VM OEXX INPUT VM VM tPZL tPLH tPHL OUTPUT OUTPUT VM VM tPZH VM tPLZ 3.5V VOL + 0.3V tPHZ VOL VOH SA00023 Waveform 1. Input to Output Propagation Delays OUTPUT VOH - 0.3V VM 0V SA00282 Waveform 2. 3-State Output Enable and Disable Times TEST CIRCUIT AND WAVEFORM 7V From Output Under Test CL = 50 pF 500 S1 Open GND 500 Load Circuit TEST tpd tPLZ/tPZL tPHZ/tPZH S1 open 7V open DEFINITIONS Load capacitance includes jig and probe capacitance; CL = see AC CHARACTERISTICS for value. SA00012 1998 Jan 16 5 Philips Semiconductors Product specification 10-bit bus transceiver (3-State) 74ABT861 DIP24: plastic dual in-line package; 24 leads (300 mil) SOT222-1 1998 Jan 16 6 Philips Semiconductors Product specification 10-bit bus transceiver (3-State) 74ABT861 SO24: plastic small outline package; 24 leads; body width 7.5 mm SOT137-1 1998 Jan 16 7 Philips Semiconductors Product specification 10-bit bus transceiver (3-State) 74ABT861 SSOP24: plastic shrink small outline package; 24 leads; body width 5.3 mm SOT340-1 1998 Jan 16 8 Philips Semiconductors Product specification 10-bit bus transceiver (3-State) 74ABT861 TSSOP24: plastic thin shrink small outline package; 24 leads; body width 4.4 mm SOT355-1 1998 Jan 16 9 Philips Semiconductors Product specification 10-bit bus transceiver (3-State) 74ABT861 Data sheet status Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 05-96 9397-750-03476 Philips Semiconductors yyyy mmm dd 10 |
Price & Availability of 74ABT861 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |